oil loss at injector points

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gotoneatlast

New Member
Posts
3,431
Location
berkshire,uk
there appears to be a high rate of oil loss from the injector points on the engine head(300 tdi(( stained after a gunk clean, seems regular due to small patches under car)), are there any seals that i can replace at this point, is it a straightforward task?
Do i have a serious problem?

Thanks.
 
to replace the copper injector seal washers you'll have to take off the leak off assembly - these are also sealed (to the injectors) with little copper washers - so you might as well replace those while your at it

and check that the leak offs interconnecting hose (4mm o/d ish) hasnt gone loose
 
Back
Top