oil defender 2.4 puma i want to change oil in gear box trabsfer box and diff s. is ep 90 ok for all jobs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
As above, no is the answer. I've done all of those oil changes and have the correct specifications, I will dig them out and reply properly tomorrow.
 
I found this:-
Screenshot (597).png
 
Gear Box;
Specification sheet attached. At last change I used the Millers oil as per attached data sheet, which meets the required specs. I also used it in the transfer box (will attach the spec sheet for that next).
 

Attachments

  • Defender MY12 Workshop Manual (dragged) copy.pdf
    34 KB · Views: 162
  • Millers Gear Oil.pdf
    528 KB · Views: 121
Transfer Box:
Spec sheet attached. As per previous post, I've currently got the Miller's in mine. Previously used Castrol Syntrax Universal Plus, 75W/90 fully synthetic. I think it's available as GL4 and as GL5, I will have used GL5. I think the important things are GL5, fully synthetic, 75W90. Another very important thing - on the Puma, the filler plug is NOT a level plug. The correct volume of oil needs to be measured and put in the box.
 

Attachments

  • Defender MY12 Workshop Manual (dragged) 2.pdf
    43.5 KB · Views: 152
Front and Rear Diffs;
Spec sheets attached, I've currently got a semi synthetic Comma oil in mine as per attached data sheet, previously had the Castrol Syntrax in there as per my earlier post.
 

Attachments

  • Defender MY12 Workshop Manual (dragged).pdf
    31.5 KB · Views: 137
  • Defender MY12 Workshop Manual (dragged) 2.pdf
    35.5 KB · Views: 110
  • SX75w-90 GL5.pdf
    317.3 KB · Views: 124
thanks for your help windblower ill sort some out 👍looking at it then i could put millars xf premium mtf 75/90 in all three safely after reading the attachment you sent for millars
 
Last edited:
Back
Top