None of the level leds are working.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jlsplinter

jlsplinter

New Member
Posts
166
How do I know the suspension system is OK on a RR 2002 hse. Want to see if it is a good car to buy. When it start I don't see any of the lights on or blink.
 
Last edited:
Yes I went yesterday to take a test drive and saw the coil springs. I wonder if that could be a problem if I want to take it off-road, cause the springs are very short. Like 8 to 10 inches.
 
The springs are short but the vehicle is pretty high. It has 3 to 4 inches of clearance in the tire.
 
I was thinking the same. But I have to verify if the system works before replacing the coil springs.
 
jlsplinter said:
I was thinking the same. But I have to verify if the system works before replacing the coil springs.
Click to expand...

Bits are cheap enough on Ebay, solenoid block with driver £50 or less, compressor about the same. EAS ECU should still be in place under the passenger seat but worth looking to see if it is there:)
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
971
kevleaper
K
R
Park brake not working
Replies
14
Views
700
roythebus
R
E
L322 TV.
2
Replies
21
Views
1K
kds
K
Blob
L322 Adaptive Dynamics Height Sensor issue (but it works...)
Replies
2
Views
822
Graculus
Graculus
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
Back
Top