Freelander 1 No start

Neelsfromsa said:

Freelander 1 td4 2.0l hse 2007 ran well but now it tuns over but won't start.

Click to expand...

Arctic2 said:

Try a leak back test, or check the HPFP regulator O-rings, maybe first try a little engine start spray into the EGR while turning the car over see if it runs or cuts out, only ever use a quick sniff and never keep repeating.

The above can be done with a diagnostic tool which is what you need to do really, otherwise you are hoping

Click to expand...

Neelsfromsa said:

Thank you. I will try and come back to you.

Click to expand...

Nodge68 said:

That's your problem.
Make sure the bits aren't stuck in the pump.

Click to expand...

Neelsfromsa said:

Thanks Arctic2 for al your helpView attachment 312556

Hi, how do I do that....sorry, a bid stupid with this

Click to expand...

Arctic2 said:

All you can do is check where the regulator pushes into the HPFP wipe it out with a small clean rag with a bit of diesel on it. hopefully you purchased the O-ring set with the large black O-ring which a lot do not and add the extra seal.

1

This one is a split one so don't make the mistake thinking nit is damaged when you open the new set of O-rings, you will need to twist it a little to get it on.

2

As above make sure you fit this seal, smear with a little diesel to lubricate before fitting.

3

4

But you have found your problem i would say

Click to expand...

Neelsfromsa said:

Thank you very much. You helped me a lot........ You are the best

Click to expand...