jonathan leason
Member
- Posts
- 73
- Location
- hull
Bean out and about the last 2 days .changing gear no problem, then won't go into any gears at all .got home turn off went back to it on both days fine no problems at all driving OK again?
No gears
- Thread starter jonathan leason
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,073
- Location
- west wales coast
Check your clutch fluid.
jonathan leason
Member
- Posts
- 73
- Location
- hull
Bit new to this
Cheers both brake and clutch are in the same cylinder it looks full
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Right. Now check everything else 
jonathan leason
Member
- Posts
- 73
- Location
- hull
Such as pleaseRight. Now check everything else
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Start with the low high stick. Is it slipping into neutral.
Has the clutch master/slave cylinder failed. Is it pushing the forks. Has the clutch plate got enough meat on it and is it void of oil.
Are the gear selectors free and working.
Has the clutch master/slave cylinder failed. Is it pushing the forks. Has the clutch plate got enough meat on it and is it void of oil.
Are the gear selectors free and working.
jonathan leason
Member
- Posts
- 73
- Location
- hull
Thanks for that. It's working fine now but I bet if I go out it starts again after a drive strange fo you think, not like it all the time
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
They have a life of their own that takes constant fettling. Just don’t paint it with rust remover like I did.
jonathan leason
Member
- Posts
- 73
- Location
- hull
Thanks for that I think I need to chill out a bit with it and expect problem
