Hi to all from swindon,I have a 1968 109 with a defender 300tdi engine and box in it,last wednesday I came back from shopping landy was running great,parked it in the drive all was well,came out the following morning to go to work and could not get it to go into gear, plenty of pressure on clutch pedal just refused to go into any gear (no grinding just physically refused),thought I would change the slave cylinder (had to start somewhere) bled it through and all was fine,went to work (fine)went to come home and it refused to go into gear again,RAC said it was clutch so changed it and found three lugs had broken off the pressure plate and were wedged inside pressure plate fingers ,I thought I had found the problem,fitted a heavy duty clutch kit bled it through but now I cant get reverse or 1st,it will go into the other gears but you have to push it hard,it will only go into 2nd and 3rd low box, so original problem wasnt the clutch BUT WHAT WAS IT!!!!!!!, sorry to waffle on but I really need someones help to get to the bottom of this, many thanks for reading.
no gears
- Thread starter mnj982
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Don't make me hit you.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
the tree selector shaft jaws have to be exactly alined in correct place , there are a dentent ball and spring to ensure this,they may be seizing ,2 under l shaped plate on side of top one for 1st 2nd under cap on top , unless shafgts are aligned gears can be selected as only one shaft at a time can be moved if one isnt fully home the rest wont work ,obviously you could hyave issues in the box but they could only be fixed with box removal and overhaul
Defender Doc
New Member
- Posts
- 12
- Location
- West Midlands
Go to your local breakers yard and ask them for a long stand - you'll need one to get your gearbox out.
