No Clutch Help

Went out last night all well, come to go out today and my clutch had gone! clutch pedal hard to press and when i let it out noughting happens. I cam put it in to any gear with the engine running and goes no wear. fluid in the master cylinder so dont know whats up with it any one help please

could be the clutch arm/release shaft seizing in casing. check if you can move it manually and dose it with wd40.

Assume your diesel is an L series Nicky. If so then Chaser is on the case with the release arm unable to rotate in the bush in the bell housing. WD40 or alike dosed all around it. Get the under tray off and get hold of the arm and give it some abuse (Well, force it back and forth to get the oil in, not beat it to death ).

Good luck and let us know what you find.

Thanks,

Have given that a go but the arm is solid now the slave cylinder has come off Opps, Got a new clutch kit, master and slave cylinder going to replace all and have a look at the arm when it all out.