No Brakes At All

1976 Land Rover · Nov 16, 2020

Hi, Does any one have an idea why my 1976 series lll 109 does not have any brakes? when I top up the reservoir it drops to a point under the low mark. Where is this brake fluid going? and whats needed to get them to work? Thanks Riley

jamesmartin · Nov 16, 2020

either your brake pedals get wet or one or more of your drums

Ratae · Nov 16, 2020

You have a leak.
Could be a failed master cylinder seal(s), a failed wheel cylinder(s), a split flexible hose or a metal brake pipe corroded through.
You're going to need to have a thorough look.

1976 Land Rover · Nov 16, 2020

Thanks will have a look at all mentioned possibility.

rob1miles · Nov 17, 2020

You should see a puddle under a brake, down the tyre, or on your foot, if nowhere then odds on its gone in the servo and you need a new master cylinder.

No Brakes At All

1976 Land Rover

Member

jamesmartin

Well-Known Member

Ratae

Well-Known Member

1976 Land Rover

Member

rob1miles

Well-Known Member

Similar threads