Newbie

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jules59

Jules59

Member
Posts
45
Location
Warwickshire
Hi
Thought I'd join as I'm going to need a little help with a Series 3 rebuild. Ive taken over an abandoned project which has stood for 3 years. The diesel engine had been removed by the previous owner to undertaken a petrol conversion, which was never done. The chassis is galvanised. Ive repaired the bulkhead and put the diesel back in. I'm now in the process of sorting out brakes, electrics, throttle controls etc etc.
In the past I've done a V8 conversion on my TD Defender 90 truck cab and then stupidly sold it.
 
Here you are - just a few for starters. This is how she arrived - engine at the rear and several boxes of bits inside the cab
S3 (01a)(Large).jpg

Bulkhead repairs - both footwells had rusted through in places
S3 (11) (Large).jpg

Engine now in - just trying to work out what wires and controls goes where
IMG_20190126_101734554 (Large).jpg
 
A hah! A series joiner, increasingly rare these days. Firstly welcome and walk tall cos any Series vehicle is the original landy. It only has one name and sub class of series; you’ve got an iconic vehicle.
In saying that the 2.25 standard diesel is a dog of an engine. It’s challenging to get through emissions tests. Try to get hold a petrol 2.25 ideally with a Weber carburettor.?
 
You must log in or register to reply here.

Similar threads

T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
A
Electric handbrake
2
Replies
20
Views
2K
E~FENDER
E~FENDER
Chazb5046
Disco 2 TD5 injector seal - disconnect fuel lines?
Replies
12
Views
1K
tilly2
T
mjr92
Sluggish 200tdi
Replies
6
Views
696
mjr92
mjr92
BTD1
Paint Code + selling price help!
Replies
11
Views
990
BTD1
BTD1
Back
Top