Newbie arrived today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Haven’t any pics at the mo, but what I do have is a weird problem.
Just changed the front wiper motor. This came with a new home switch. All fitted, simple plug in. Wipers work fine, but now I can’t turn the wipers off ‍♂️ Anyone have any clues ?
Did have some water ingress through the front vents, but all is bone dry now, so it’s a bit strange.
 
I had a problem with my wipers not turning off, I changed the switch cleaned and checked the wiring connector. Still didn't turn off, only way was to turn ignition off. There's a little spacer/circlip on the spindle shaft which you can see on the outside of the motor, mine had worn out so I made a spacer and fitted it. Worked ever since
 
IMG_20220426_085625~2.jpg
IMG_20220427_180925~2.jpg
IMG_20220427_180702_1~2.jpg
IMG_20220428_102008~2.jpg
 
steve24v said:
I had a problem with my wipers not turning off, I changed the switch cleaned and checked the wiring connector. Still didn't turn off, only way was to turn ignition off. There's a little spacer/circlip on the spindle shaft which you can see on the outside of the motor, mine had worn out so I made a spacer and fitted it. Worked ever since
Click to expand...
Thanks for that Steve. I did replace the cut clip which seemed too easy, then realised I’d missed out a washer/spacer, so took it apart and reassembled it. Everything was then tight and fitted well, so quite sure the problem lies elsewhere. Seems strange why the problems occurred in the first place. As you probably know, it’s almost plug and go !
 
You must log in or register to reply here.

Similar threads

B
New to the forum
Replies
4
Views
668
saxavordian
saxavordian
Lex Myster
Introduction - Freelander 2
Replies
9
Views
881
brianp38dse
brianp38dse
B
Returning to the fold
Replies
3
Views
615
brianp38dse
brianp38dse
F
Disocvery 2 inner wings
Replies
2
Views
293
Frazzle
F
M
Hello!
Replies
4
Views
747
MelancholyDonkey
M
Back
Top