- Posts
- 16,475
New Rad delivered....
- Thread starter Saint.V8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
fingers crossed for the Saint !
- Posts
- 16,475
Cheers Hippo...!!
Wanagetmuddy
New Member
- Posts
- 348
Did that in September last year.
Easy enough to do I couldnt undo the fan (Was very tight)
So I undid all round it and it was a squeeze to get it in but it went in !
But Good luck with it !! Deffo do a How to cos I didnt take any photos when I did it!
It took me a little while to work out how to take the clip off the hoses !lol
Easy enough to do I couldnt undo the fan (Was very tight)
So I undid all round it and it was a squeeze to get it in but it went in !
But Good luck with it !! Deffo do a How to cos I didnt take any photos when I did it!
It took me a little while to work out how to take the clip off the hoses !lol
DiscoToms
New Member
- Posts
- 73
- Location
- Birmingham
How much did you pay for it?
- Posts
- 16,475
£163.99 with the VAT mans take...
- Posts
- 16,475
That is the only thing I am dubious of, is can I get the fan off!! looking at the nut, others have tried and looks a bit chewed...
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Carboard over the fins is good if its tight and fiddly getting stuff out 
good protector
good protectorforthbridge
Active Member
- Posts
- 150
- Location
- Suffolk
Saint,
I'm in the same boat with the rad on my L322. Having done the job on my P38, the WSM was specific about making up the coolant with demineralised water. Do you know if the L322 is as fussy? Can't see anything in RAVE, but maybe I missed it?
Thanks
I'm in the same boat with the rad on my L322. Having done the job on my P38, the WSM was specific about making up the coolant with demineralised water. Do you know if the L322 is as fussy? Can't see anything in RAVE, but maybe I missed it?
Thanks
Wanagetmuddy
New Member
- Posts
- 348
When I did mine I just flushed it through thoroughly put the OAT Coolant and filled it with normal water !
Wanagetmuddy
New Member
- Posts
- 348
Carboard over the fins is good if its tight and fiddly getting stuff out
Very good tip I did that with the left over packaging
