New loom

Davv · Jan 21, 2014

As you might know I'm doing a rebuild. Now going to all this trouble and trying to repair the old wiring is, I think a waste of time so, New wiring ? Autosparks anyone else? Also how good quility?

Davv · Jan 21, 2014

bump bump bump

AlbertDefender90 · Jan 21, 2014

I've been looking at the autosparks ones as well. They seem a little expensive so I'm going to try a full rewire on my rebuild and make sure I use plenty of conduit to keep it neat and tidy

mick the builder · Jan 21, 2014

AlbertDefender90 said:
I've been looking at the autosparks ones as well. They seem a little expensive so I'm going to try a full rewire on my rebuild and make sure I use plenty of conduit to keep it neat and tidy

+1. If you can make one with original wire colour codes for a 200tdi, you may have a couple of customers

AlbertDefender90 · Jan 22, 2014

mick the builder said:
+1. If you can make one with original wire colour codes for a 200tdi, you may have a couple of customers

I'll have to have a think about that

mick the builder · Jan 22, 2014

AlbertDefender90 said:
I'll have to have a think about that

Get back to me when youve thought about it

AlbertDefender90 · Jan 22, 2014

Might be a while I'll have to see how my own looming goes

greyhair · Jun 24, 2014

AlbertDefender90 said:
Might be a while I'll have to see how my own looming goes

Did you manage to do anything ref a wiring loom ?

Im need to mine replace

AlbertDefender90 · Jun 26, 2014

Sorry not managed anything yet but I'll keep you up to date

FlyingPete · Jun 26, 2014

I replaced my engine bay wiring loom after a minor 'thermal event'. I just bought wire in the right colours and some connectors. Use the old loom to get the correct wire lengths and tape it all up neatly with non-adhesive wiring tape. If you have the time and patience you should be able to replicate the entire wiring loom this way.

greyhair · Jun 26, 2014

the issue I have with mine is it has been cut and bodged so many times and not by me
the engine bay wiring loom is just a mess

AlbertDefender90 · Jun 27, 2014

My old wiring loom has had a few patches put in it but it's complete enough to use as a reference. Just need to get round to sorting it out

greyhair · Aug 9, 2014

AlbertDefender90 said:
My old wiring loom has had a few patches put in it but it's complete enough to use as a reference. Just need to get round to sorting it out

Did you manage to get one done yet

getting close now my new chassis comes on the 23rd :crazy_driver:

AlbertDefender90 · Aug 9, 2014

greyhair said:
Did you manage to get one done yet getting close now my new chassis comes on the 23rd :crazy_driver:

Sorry no, still struggling to get much done (farm work and projects don't mix) but I'm going to try and get my old loom pegged up soon and start measuring up, so I may have something in the next few weeks all going well 😊

Chilli · Aug 14, 2014

HI, what loom are you looking for? I have a late 200 tdi/ early 300 tdi bulkhead loom, otherwise Autosparks are great, I would get the latest spec loom possible, they tend to use more relays so don't burn switches etc, phil

New loom

Davv

New Member

Davv

New Member

AlbertDefender90

Active Member

mick the builder

Well-Known Member

AlbertDefender90

Active Member

mick the builder

Well-Known Member

AlbertDefender90

Active Member

greyhair

Well-Known Member

AlbertDefender90

Active Member

FlyingPete

Well-Known Member

greyhair

Well-Known Member

Attachments

AlbertDefender90

Active Member

greyhair

Well-Known Member

AlbertDefender90

Active Member

Chilli

New Member

Similar threads