new clutch but cant get 1st gear

C

Coffee Monster

New Member

Posts

25

Location

Wednesbury

• Jun 12, 2010

• #1

I have had a look thru past threads but cannot find any answers so starting a new thread before any bugger says anything.

Have got 97 Disco 300 Tdi, justed had fitted new clutch, bearing and strenghened clutch arm, system has been bled BUT cannot get 1st gear with out forcing it in. Ditto with reverse.

Is it something I have missed, not done, overlooked, or do I have a new problem.

Didnt have these problems before clutch change.

All/any help/advice gratefully recieved.

Many thanks

 

M

martinhollings

New Member

Posts

659

Location

newark/nottingham

• Jun 12, 2010

• #2

how easy did the engine and gearbox go back together if they were forced then it will damage the clutch plate in no then it will be air but 300tdi normaly blead easy

 

T

terryds

Member

Posts

99

Location

Enfield; Middlesex

• Jun 13, 2010

• #3

May be the slave cylinder seals are failing. It sounds like air in the system. How is reverse?

 

its stuck

New Member

Posts

60

Location

Whitstable Kent

• Jun 13, 2010

• #4

terryds said:

May be the slave cylinder seals are failing. It sounds like air in the system. How is reverse?

Click to expand...

I think he ditto'd reverse in the original post

 

alex8882

Well-Known Member

Posts

1,377

Location

lytham,st.annes

• Jun 13, 2010

• #5

Did my clutch last week, But before this had trouble selecting first and thrid. Now i found that a 10p had dropped down in between the gear stick,and the gearstick housing. Maybe worth alook. Sound really silly i know but maybe something dropped down when you took the centre console out.
cheers alex

 

thebiglad

Well-Known Member

Posts

7,387

Location

Central France

• Jun 13, 2010

• #6

Sounds to me like the clutch hydraulic circuit needs bleeding some.

 

P

Phil_P

New Member

Posts

9

• Jun 13, 2010

• #7

it is a complete bitch bleeding the clutch - i gave up puming mine, and left a brick holding the pedal down for the weekend - it bled itself!!

 

alex8882

Well-Known Member

Posts

1,377

Location

lytham,st.annes

• Jun 14, 2010

• #8

Just another thought again really stupid,but the pin which clips to the end of the clutch, is still attched,and located into the slave is it.

 

B

BrianB

New Member

Posts

130

Location

Hebburn, Tyne and Wear

• Jun 14, 2010

• #9

I had the same problem on my disco 2, repaced slave and master cylinder which made no difference, Turned out that the brand new clutch kit was faulty Guy i bought the kit off had had a few kits returned with exactly the same problem. New jit supplied and all working great now.

Brian

 

alex8882

Well-Known Member

Posts

1,377

Location

lytham,st.annes

• Jun 14, 2010

• #10

The clutch i pulled out of mine last week had been in less than 12 months, It was a borg and beck so not cheap. The clutch hub rivets had sheered off so springs everywhere lol. Hope you get it sorted as it can be really anoying,when you just want it runing right.

 

T

terryds

Member

Posts

99

Location

Enfield; Middlesex

• Jun 14, 2010

• #11

Have you tried ezzybleed. A pressurised bleeding system may resolve the problem. I would be extremely miffed if the gearbox had to be dropped again. Not heard from you since Saturday.

 

P

Phil_P

New Member

Posts

9

• Jun 14, 2010

• #12

have u got the correct clutch arm?

mate had that issue on his disco - he was supplied the wrong arm as such he couldnt select 1st or 2nd

 

C

Coffee Monster

New Member

Posts

25

Location

Wednesbury

• Jun 16, 2010

• #13

Thanks for the info posted. I will have a go at bleeding the system again. If its any further help, I used a Valeo clutch and bearing, Britpart reinforced clutch arm plus new clips and pins. I am not expecting any of these to have failed but then again any thing is possible.