My poor disco

oldskool said:

Southeast shady drinking fairies if you dont mind monkey boy

Click to expand...

:hysterically_laughi:hysterically_laughi

Any way back on topic,

Get the grinder out

V8Jay said:

:hysterically_laughi:hysterically_laughi

Any way back on topic,

Get the grinder out

Click to expand...

Had the air and electric grinders out and the air hack saw, hammers/chisles of various sizes air drill, electric drill battery drill, ive had most of me fooking toolbox out on this. And its quite a substansial tool box.
Oh and a bit more rust for ya

looks like a right pain in ass, how far are you taking it back?? Have you ever used the stuff that changes the rust back to a firm metal again?? Ive never welded to it like.

but might save you some time and grinding disks

V8Jay said:

looks like a right pain in ass, how far are you taking it back?? Have you ever used the stuff that changes the rust back to a firm metal again?? Ive never welded to it like.

but might save you some time and grinding disks

Click to expand...

Yes used it before but this is a bit past that its goig all the way back to solid steel and the new steel to be welded in, i have actualy started welding it back together and will be posting more picks as and when so keep watching.
Going home now got an early start at workshop in morning and a busy day ahead.

no worries fella look forward to pics

looks like one i just done!
(an it didnt have filler in before OR after)

just to share, an so you know your not alone!



had to stick outer sill on temp so i didnt loose door pillar position

nrgserv said:

looks like one i just done!
(an it didnt have filler in before OR after)

Click to expand...

I think from what i've seen they all look prety simular they all seem to rust in exactly the same area's.
Mine won't be getting any filler either or paper shoved up the sills , just proper stell going back in mine.

what reg is yours?
just noticed the first pic so had a look.
your seats frame unbolts from the floor, the one i had unbolted from them silly brackets that were spotted to the floor.

nice shop btw!

nrgserv said:

what reg is yours?
just noticed the first pic so had a look.
your seats frame unbolts from the floor, the one i had unbolted from them silly brackets that were spotted to the floor.

nice shop btw!

Click to expand...

97 'R' reg, seats bolted straight into floor.
Cheers, it will be when it's finished.

you keep an armed guard on that tool chest?

if ya dont whats yer address?

back to topic - I've done almost exactly the same points on mine - no time for pics this time, cos the welsh sunshine was starting.

trax99 said:

you keep an armed guard on that tool chest?

if ya dont whats yer address?

Click to expand...

Oh yes well not an armed gaurd but fully alarmed direct to police and my mobile internal and external CCTV which i can watch on me putta. Oh and tool box is chained to floor anorl.

ptrobably for the best, you must have spent a fair old wack on the thing though, you in the trade?

trax99 said:

ptrobably for the best, you must have spent a fair old wack on the thing though, you in the trade?

Click to expand...

Yer mate i am, thats my workshop. There's approx £20-£25,000 sitting there, scares the fooking life out of me when i think how much i have spent in the last year fitting that place out but you can't do the job without the equipment.

Here's a couple more piccys for ya.

This is where yhe air cleaner intake goes (inner wing) Having probs uploading piccy's will try again later

lovely tool box oldskool,

Worse thing I ever did was trade my snap on box in for a Mac tools one

V8Jay said:

lovely tool box oldskool,

Worse thing I ever did was trade my snap on box in for a Mac tools one

Click to expand...

Oh dear, there ok but you can't beat snap-on boxes, fooking expensive though.

Woss wron wiv a cupple of owld ammo boxes???

sold the buisness and had to down grade it wouldnt fit in my garage