Alibro
Well-Known Member
- Posts
- 7,346
- Location
- Northern Ireland
My hippo is quacking!
- Thread starter lenny1234
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lenny1234
Active Member
- Posts
- 315
- Location
- East Anglia
Joking aside, it makes the noise more or less correlated with road speed. So its in the transmission post gearbox somewhere.
It doesn't vary with steering or braking or accelerating. So I kinda ruled out disc/pad rubbing. And possibly wheel bearings, which leaves CV joints and the VCU maybe.
VCU has been re-bearinged recently so that ought to be OK.
I guess get it on a lift and have a poke. Needs new front tyres anyway so maybe take it to a tyre place and ask nicely..
It doesn't vary with steering or braking or accelerating. So I kinda ruled out disc/pad rubbing. And possibly wheel bearings, which leaves CV joints and the VCU maybe.
VCU has been re-bearinged recently so that ought to be OK.
I guess get it on a lift and have a poke. Needs new front tyres anyway so maybe take it to a tyre place and ask nicely..
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,115
- Location
- Gloucestercotshirewolds
Don't put new tyres on the front!
lenny1234
Active Member
- Posts
- 315
- Location
- East Anglia
I thought new tyres on the front was the right way round?
New tyres of the same make, type and size go on the rear. The wheels from the rear get moved to the front.
GrumpyGel
Well-Known Member
- Posts
- 27,149
- Location
- Christchurch, New Zealand
For someone who doesn't run a Freelander, and I guess never has, that's very well spotted
You're obviously a font of all knowledge. Any advice for the 4:30 at Kempton?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,115
- Location
- Gloucestercotshirewolds
For someone who doesn't run a Freelander, and I guess never has, that's very well spotted
You're obviously a font of all knowledge. Any advice for the 4:30 at Kempton?
Nope never but I've got some mates that have
As for the 4.30 I've never lost a penny on the nags by following my foolproof system of avoiding bookies
Alibro
Well-Known Member
- Posts
- 7,346
- Location
- Northern Ireland
Who fitted the bearings? Are you sure they were fitted properly ie at 90 deg to the VCU NOT the propshaft.
