My disco is ****ed !

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Denty

New Member
Posts
52
Location
essex
Hi peeps,

Bought a disco 1 little while back and have noticed that it is lop sided ! It has a 2 inch lift kit and after measuring each arch front and back and on both sides I have noticed that the drivers side is 2 inches lower.
I am new to all this business, so would appreciate it if some one could guide me as to what and where to look to try and identify the probs !!

Cheers.
 
after measuring each arch front and back and on both sides I have noticed that the drivers side is 2 inches lower.

Forget measuring floor to arch. Get undernerath and measure the length of each spring. That way, you can rule out (or not) other problems.

Make sure you do it on flat ground. :cool:
 
Hi I have measured all 4 springs and the 2 drivers side are 30 mm more compressed ? Suggestions please 👍
 
Oioi. Don't drop the soap when Danny's about 😳.

Cheers dudes. I'll have a fiddle ( calm it Danny) and ill let u know how I get on. !
 
Back
Top