MOT Test disaster

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
THEengineer said:
how does the footwells fail/get a advisory? my tester said it has a separate chassis so not bothered ,even though i have now fixed mine to stop the pup falling through
Click to expand...

I thaught same but still got them professionally cut out and plated months ago then they still advised it as corroded and it is not. The other annoying thing I'd they must have smoke checked it with a cold engine as it takes a good 10 mins on the motorway to get up to temperature and it I'd running on bio with practically no smoke at running temperature. Also the exhaust is months old with new rubbers when it was fitted and the rubbers failed and exhaust advised as corroded!
 
I had a big hole in drivers footwell, Local Landrover Specilist MOT garage told me that it is Not a fail, was quite suprised as it was a big hole. Then another MOT garage 2 mile down the road said that it is Definatly a fail, all depends where you go.
 
toms3 said:
Then there's theese two holes in the arch Wich I thaught would not have been a problem...


Bit of a bad day but in a way problems where found early - at least that's what I'm telling myself to cheer me up lol. Total bill will be £610 as he repaired my spring mount too.
Click to expand...

£610 is pretty cheap as there's a fair bit of labour involved in welding the chassis up (ask me how I know) I take it you're not up to doing it yourself?
 
flat said:
Your a bloody idiot. A chassis is £1000 - £1300 BEFORE labour and other parts. You don't half pedal some ****.
Click to expand...

Look at Pikey he chased/fought rusty chassis for how long? Repaires will never end. New chassis and forget about it for 20 years or more. Money well spent, cheaper in the long run
 
Marmaduke said:
£610 is pretty cheap as there's a fair bit of labour involved in welding the chassis up (ask me how I know) I take it you're not up to doing it yourself?
Click to expand...

I agree he is fixing all the other stuff as well as the welding too and he has allready spent the morning on it repairing the spring mount. Im happy he is doing it as he has had a few landrovers too. I bet that would be nearly half the price at some places just for the spring mount fixing. And no iv not welded before - thaught bout it but think it's best left to a professional welder. Especially when I have my girlfriend/kids in the back!
 
flat said:
Your a bloody idiot. A chassis is £1000 - £1300 BEFORE labour and other parts. You don't half pedal some ****.
Click to expand...

Don't hold back there mate, tell it like it is:eek: Although you only said what I was thinking:D

I did my own eighteen months ago for the price of 4 spring hangers a square metre of steel. Saving up for a galv chassis though but I'd expect me current chassis to easily last a good couple of years
 
Thor1950 said:
Look at Pikey he chased/fought rusty chassis for how long? Repaires will never end. New chassis and forget about it for 20 years or more. Money well spent, cheaper in the long run
Click to expand...


you suggested that it owuld be cheaper than £610 to re-chassis it. Might be cheaper in the long run but not everyone has the cash to bung into a re-chassis.

Your just an internet know-it-all. A boring one at that.
 
You must log in or register to reply here.

Similar threads

P
Mot and oil leaks
Replies
8
Views
458
paul griggs
P
J
Excessive smoke MoT failure
2
Replies
28
Views
2K
Rangieman123
Rangieman123
B
MOT failure
Replies
4
Views
467
R-Two-D2
R
tottot
Rear brake unbalance
Replies
17
Views
1K
tottot
tottot
P
Disco 2 MOT fail, front body mount
2 3
Replies
58
Views
5K
PopPops
P
Back
Top