SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Is this possible? Remember reading somewhere that the modulars have a flat back, so does this mean that they wouldn't sit over the centre lip of the spacers?
Modulars with Spacers - Yay or Nay?
- Thread starter SES88
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Duncp73
New Member
- Posts
- 657
- Location
- Darlington
From what I've seen Simon you don't need spacers.
JC600
Well-Known Member
- Posts
- 1,103
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
If there's plenty inner arch clearance with no spacers then I may be joining the modular club...use the money from my spacers for a ronbox 
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
You don't need spacers!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Do people just make this stuff up? Maybe it's the bender boys trying to sow the seeds of doubt??
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
The thread wasn't about whether I need them or not, was about whether they can be combined or not. Already know spacers aren't needed, but I already have them and was just curious.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Well if I put them on mine it would stick the wheels out past the arches, plus screw the bearings quickly cos it'd amount to about a 2" offset!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
I was only asking...
JC600
Well-Known Member
- Posts
- 1,103
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Jig saw the arches be tight but should go round!
be tight but should go round!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Could fit 265/75/16 with 30mm spacers + modulars lol
265/75 wouldn't go on, they're too big for the arches lol, had me excited there for a minute
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Chill Simon, it's just one of those questions that gets asked a lot.
Yeah but was asking if they can be combined, I already know they're not needed
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
You can do anything. As long as it's safe and you've got the money to experiment
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
There's one with rr sport wheels on it and they's huge!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
That's 60mm dia bigger than my 225/75's, would need completely rearranged arches
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Gearing would be a tad out!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
7% off of my 225's so about 13% off standard
Similar threads
