Gezz01
Member
- Posts
- 14
- Location
- North Walsham
Any advice on re- fitting a centre seat to a 2014 puma tipper. I realise it will not leave any leg room and removal of the plastic central section. Greatly appreciated. Roll on for a better 2021!!!
Middle seat fitting.
- Thread starter Gezz01
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Refitting? Pumas didn’t come with a 3 front seat configuration. Look at the top of the line CSW, it’s only a 7 seater, 2, 3, 2. I’m not sure the seatbox has the fittings, and I’m quite sure the insurance won’t cover it.
Edit: just had a look and it’s down to vehicles of the Puma era requiring 3 point seatbelts in front/all seats.
Last edited:
tottot
Well-Known Member
- Posts
- 8,082
- Location
- west wales coast
Another problem if you did do it is that the outer seats were moved inwards some to make more elbow room for driver/passenger with the Puma.
[ Cant say it made much difference myself ]
[ Cant say it made much difference myself ]
Gezz01
Member
- Posts
- 14
- Location
- North Walsham
Got it fitted with a 2 point linkage. Right squeeze with diff lock gearknob bit awkward. Think I need 3 point inertia belt?? Rear bulkhead has two glass sliding windows. Do’h!!
Cheers
Cheers
- Posts
- 1,205
- Location
- The Flat lands of Cambridgeshire
I fitted Renault Espace rear seats in mine, they come fitted with integral belts but not sure they will fit width wise will have a measure if your interested
