Mazda RX8 Seats - Will 3 seats fit in front of 110?

I've picked up a pair of Mazda RX8 seats (Non Electrical) that I plan on fit in my 1984 Landrover 110.

Can anyone confirm if a third RX8 seat will fit in the middle. That would leave 3 Mazda Rx8 seats in the front.

I've two boys and to stop arguments I'm going to have to try and make two seats work somehow - I can just see the arguments now if I only change out the drivers and main passenger seat. Keep in mind that I have a 1984 110 that has no door cards that will be fouling the side of the seat.

Help please guys....

Ive put the original LR seat back in the middle. The bolsters of the rx8 seats just overlap the top of the middle seat so id say it wouldnt fit.

You could avoid upsetting the boys by putting the 2 Rx8 seats in the passenger and middle and sit on a cushion while you drive

mick the builder said:

Ive put the original LR seat back in the middle. The bolsters of the rx8 seats just overlap the top of the middle seat so id say it wouldnt fit.

Click to expand...

Thanks for that Mick - I'm sure I found an image online before of the 3 RX8 seats....

You hardly have any pictures taken mick?

No chance. iv'e got a cubby box between mine and there's not a lot of room for the seat belt thingy

exmed wayne said:

You could avoid upsetting the boys by putting the 2 Rx8 seats in the passenger and middle and sit on a cushion while you drive

Click to expand...

Don't write it off yet... It could be easier than trying to deal with two boys (6 & 8). I feel like I'm trying to control a mob...

sm0129 said:

No chance. iv'e got a cubby box between mine and there's not a lot of room for the seat belt thingy

Click to expand...

There's a consistent echoing going on here. It doesn't look like I'm going to be able to make 3 of these seats work... Thanks for the heads up @sm0129

poreilly101 said:

Don't write it off yet... It could be easier than trying to deal with two boys (6 & 8). I feel like I'm trying to control a mob...

Click to expand...

You've just found the answer...
Put the RX seats in the back and fit a dog cage

on a serious note - put the 2 seats in loose and measure the gap between them then compare that to the width of the seat?
The passenger side would probably move across 6-8cm closer to the door, but if you did the same with the drivers seat you would be at a weird angle every time you drove and it would drive you mad.!

exmed wayne said:

You've just found the answer...
Put the RX seats in the back and fit a dog cage

on a serious note - put the 2 seats in loose and measure the gap between them then compare that to the width of the seat?
The passenger side would probably move across 6-8cm closer to the door, but if you did the same with the drivers seat you would be at a weird angle every time you drove and it would drive you mad.!

Click to expand...

The drivers position is already a little of center. I don't know what to do....
I've an offer for a matching 2nd pair of Mazda seats for very small money but I have to get them tomorrow if I'm going ahead with them. So, I need to make a call on it as to what I'm going to do... If they would physically fit, I would almost live with being slightly further off center.

Fit 2 and make them take it in turns. One sits in nice mazda seat on way to Sainsbury's, t'other gets it on way back

poreilly101 said:

Thanks for that Mick - I'm sure I found an image online before of the 3 RX8 seats....

You hardly have any pictures taken mick?

Click to expand...

Bad photo but you get the idea

mick the builder said:

Bad photo but you get the idea

Click to expand...

It's tight but looks possible... If I can get 6 CM from the passenger side and maybe two from the drivers - we could be on business?

Appreciate the picture @mick the builder

Im using the seat belt clips from the mazda which are bolted to the seat, that save a few cm. As you say, with no door cards you may have a chance but as Wayne said make sure the drivers seat is centered comfortably for driving and push the other two over.

mick the builder said:

Im using the seat belt clips from the mazda which are bolted to the seat, that save a few cm. As you say, with no door cards you may have a chance but as Wayne said make sure the drivers seat is centered comfortably for driving and push the other two over.

Click to expand...

Mick, I seem to remember your seats were powered. Did you get round to wiring them up ??
I still have a set sitting in the garage to fit this summer. I feel a bit on edge about setting the airbags off accidently

I now own 4 Mazda RX8 Seats. Time will soon tell if we can get them to fit...

Spare Seat going if anyone is looking for one....

meego said:

Mick, I seem to remember your seats were powered. Did you get round to wiring them up ??
I still have a set sitting in the garage to fit this summer. I feel a bit on edge about setting the airbags off accidently

Click to expand...

Not yet, I'm still trying to find a decent wiring and switching diagram for the motors and the heat. I know which wires to use and will cut and isolate the air bag wires. I wired them with a temporary set up so I could move the drivers seat. I had to get a new motor for the seat up and down motion as the drive shaft had broken off.There's a video on you tube about a guy fitting them into a vw van

mick the builder said:

Not yet, I'm still trying to find a decent wiring and switching diagram for the motors and the heat. I know which wires to use and will cut and isolate the air bag wires. I wired them with a temporary set up so I could move the drivers seat. I had to get a new motor for the seat up and down motion as the drive shaft had broken off.There's a video on you tube about a guy fitting them into a vw van

Click to expand...

Cheers mate. I seen the VW guys video a wee while ago and it is helpful. I'll get round to it soon and I will try and remember to post something up on here if successful.