Maintenance of plastic trim.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
willo

willo

Well-Known Member
Posts
2,102
Location
Belgium
Hi all,

In the past I think to have said somewhere to use lineseedoil as a very good and not expensive product to clean the plastic trim on the car. Hereafter a picture of mine after I treated it well for the winter. (I am sure I can't compete in the 'muddiest' Hippo contest with it, can I ??:D ) Anyway, the car is 6 years old, thus not straight from the showroom, finished it waxing etc.. and the plastic trim, fenders and rearview mirror housing, whiper mechanism etc.. I treated with the lineseedoil to remove all the white deposit and also to give it a brandnew look again. I know someone asked before what to use on the plastic but I can't remember where (on which forum?), but as I also know most of you are fond of pictures :D :D I took my chance here... (left small pic. shows the rearivewmirror housing in detail plus a part of the fender, the main pic. shows front view where you have an overall view as how it "can" look after 6 years, at no cost (or almost at no cost) at all.

 
jpg.gif
attachment.php
Er Willo ,to much linseed oil me thinks. . . .
 

Attachments

  • willo 2.JPG
    willo 2.JPG
    38.8 KB · Views: 384
Its ok dont panick . . . .gulp , , ,er Porky put out, bit ah scotchbrite and it'll look as good as new, er Mondo take Willo in the pub and pour him a stiff brandy, he's gone all white . . .:D
 
I recently discovered that the previous owner spray-painted all the plastinc bumpers but negelcted to use primer ..... it's now started peeling off the rear plastic trim and look awful.

Does anyone know the best way to remove the paint from plastic trim so that I can get it re-painted "properly".
Cheers
 
Simon. . .very difficult this one, but try this on a bit as a a test only, and on a bit that will not be seen, buy some universal brake fluid, have a bucket of hot water with fairy liquid in, a sponge , wear rubber gloves and ,dont get any in yer eyes, apply the brake fluid on a small bit , after bout 2=3hrs it should bubble, wash orft with the soapy water, this should give you the reaction time of the bubling, dont go beyond that time as you will melt the plastic, when happy with yer time do it in metre stages or wot yer can handle, paint stipper is to fast for plastic,hope this elps ya. . . .:)
 
mondo said:
You missed a bit willo:p :D


And thats just linseed oil you used?
Click to expand...

Where ? Where ? Quick, tell me.....

And yes, just linseedoil (on the plastic that is of course) the body I did with Lamont polish (some years back a guy sold me 3l of it outside on a department store parking, he said he worked at Lamont so I guess he pinched it but as I got it for a good price .... than I gave it a treat with an old Mercedes product I still had since about 10 years during my 190E period and when all that was done I went over the plastics with the oil.)
 
mondo said:
Looks smart dose that willo;)

Maybe we should have a Shineyest Hippo pic page!:rolleyes: :D
Click to expand...

Yes, why not, than we will have to experiment with hot waxes and other stuff, right ???:D :D :D (I bet ming with the knowledge of all, compared to us on earth very advanced, Zog technology will beat us all in a way as the French describe as "avec les doigts dans le nez".:p )
 
willo said:
Yes, why not, than we will have to experiment with hot waxes and other stuff, right ???:D :D :D (I bet ming with the knowledge of all, compared to us on earth very advanced, Zog technology will beat us all in a way as the French describe as "avec les doigts dans le nez".:p )
Click to expand...

Aww! come on willo! It's a struggle for me to understand your English sometimes, without you starting all that foreign language:D ;)
 
willo said:
Ming,

Aren't you ashamed ? After Mondo's Spitfire you now set my Hippo on fire ??:D :D
Click to expand...
Gulp um soo sorry Willo the zap guns bin playing up a bit,hope its not to badly burnt. . ..:eek: :eek: :eek:
 
mondo said:
Aww! come on willo! It's a struggle for me to understand your English sometimes, without you starting all that foreign language:D ;)
Click to expand...

Hi mondo,

Roughly translated it says:"with the fingers in the nose" (piece of cake).
 
You must log in or register to reply here.

Similar threads

C
Sill damage & plastic trim
Replies
2
Views
1K
andyfreelandy
andyfreelandy
throwyourbike
Potential New Owner
2
Replies
30
Views
2K
WhiskyLassie
WhiskyLassie
L
PLASTIC TRIM PANEL REPAIR METHOD
Replies
1
Views
785
Stanleysteamer
Stanleysteamer
Montyjohn
P38A What are the plastic lugs on the back of the steering wheel for?
Replies
8
Views
1K
Montyjohn
Montyjohn
R
Roof Lining Fixtures
Replies
1
Views
660
Keith_L
Keith_L
Back
Top