MAF Sensor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
 
Yes under top engine cover near the air filter somewhere
As above remove the air filter cover and the MAF is left top has you stand in front of the car, you could always do this MOD to the filter cover.
x1uG1hGl.jpg
1

pBIPWeWl.jpg
2

S3gFcfql.jpg
3

ZzpQhbOl.jpg
4

3DNdisUl.jpg
5

o81uQ8zl.jpg
6

J8MBDA9l.jpg
7

MOFm2h8l.jpg
4

 
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
 
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
They changed it for the 2 which makes it a bit better.
 
Thank everybody for the info and especially the photos. I better get one of those things ordered. But while I"m on I hope to put the car in for an MOT in August so I"ll book a Service and have Engine and Auto box Oil and Filter changed and they can fit the MAF sensor at the same time. Should I also use REDDEX or something similar to reduce Emissions?
 
Thank everybody for the info and especially the photos. I better get one of those things ordered. But while I"m on I hope to put the car in for an MOT in August so I"ll book a Service and have Engine and Auto box Oil and Filter changed and they can fit the MAF sensor at the same time. Should I also use REDDEX or something similar to reduce Emissions?
When you are due to have the MOT on the day give it a good 10 miles thrashing (Italian tune up,) arriving at the MOT station about 5 minutes before your due time, that way engine will be nice and hot which helps with the gas test.

Regarding the MAF get a proper one Bosch MHK101130L after market ones do not last long and can be crap right out of the box.


Rover 75 diesel ones should work also Bosch 0 928 400 520.

As with all part make sure they fit your car send your reg number to the seller.



The most important part is the insert it must have a green seal and read
7jw21jIl.jpg
1

13n655Yl.jpg
2

z71J91Zl.jpg
3

And come in a Bosch box with hologram seal.
Z9KVziml.jpg
4

Stick a bottle of this in your tank about a week before the MOT.

I use this twice a year spring and start of winter, hence why i buy four as i have two FL2

Good luck with the MOT my FL2 had it's first in my ownership last week pass no advisories.
 
Last edited:
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
They are only awkward on the Freelander !! BMW use the engine inline, so they are easy to access !!
 
Back
Top