MAF Sensor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
 
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
 
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
They changed it for the 2 which makes it a bit better.
 
Thank everybody for the info and especially the photos. I better get one of those things ordered. But while I"m on I hope to put the car in for an MOT in August so I"ll book a Service and have Engine and Auto box Oil and Filter changed and they can fit the MAF sensor at the same time. Should I also use REDDEX or something similar to reduce Emissions?
 
Thank everybody for the info and especially the photos. I better get one of those things ordered. But while I"m on I hope to put the car in for an MOT in August so I"ll book a Service and have Engine and Auto box Oil and Filter changed and they can fit the MAF sensor at the same time. Should I also use REDDEX or something similar to reduce Emissions?
When you are due to have the MOT on the day give it a good 10 miles thrashing (Italian tune up,) arriving at the MOT station about 5 minutes before your due time, that way engine will be nice and hot which helps with the gas test.

Regarding the MAF get a proper one Bosch MHK101130L after market ones do not last long and can be crap right out of the box.


Rover 75 diesel ones should work also Bosch 0 928 400 520.

As with all part make sure they fit your car send your reg number to the seller.



The most important part is the insert it must have a green seal and read
7jw21jIl.jpg
1

13n655Yl.jpg
2

z71J91Zl.jpg
3

And come in a Bosch box with hologram seal.
Z9KVziml.jpg
4

Stick a bottle of this in your tank about a week before the MOT.

I use this twice a year spring and start of winter, hence why i buy four as i have two FL2

Good luck with the MOT my FL2 had it's first in my ownership last week pass no advisories.
 
Last edited:
… I hate those 2 hex bolts at the back.
Engine designer: “oh, where can we hide some bolts awkwardly, to make something so easy just a little bit more difficult for them…”
They are only awkward on the Freelander !! BMW use the engine inline, so they are easy to access !!
 
Back
Top