Low gear button dose not works

aollaku · Jun 30, 2012

Low gear button Hi. I have Range rover P38 2.5 DSE 1996. In the panel is a button for Low gears. When i push the button nothing happend even the light on the button dose not start. Can be disabled this function or there is a problem somewhere????

:confus ed:

Datatek · Jun 30, 2012

I assume that you car has a manual gearbox? Low range is a standard fitment as far as I know, so you have a problem somewhere. Have you checked the Fuses. Otherwise have a sniff round the transfer box ECU for burning smells, it's under the passenger seat on RHD cars.

aollaku · Jul 2, 2012

Yes there is no sign of burn or smell that something is burned.

chort · Jul 2, 2012

Probably a fuse.

Do you get any messages at all on the dash display when you press the Hi-Lo range button? Check if the plug of the Transfer box ECU is seated correctly (unplug and plug again). Could also be a duff dash button.

aollaku · Jul 2, 2012

There is no burned fuse. And in the display dose not say something about this. I have checked the connection and all is ok

fanatic · Jul 2, 2012

transfer box motor seized through lack of use is known problem on p38, also I seem to remember transfer box ecu superseded part number wise as early ones burnt out.

Low gear button dose not works

aollaku

Active Member

Datatek

Well-Known Member

aollaku

Active Member

chort

Active Member

aollaku

Active Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Similar threads