Makatak1967
New Member
- Posts
- 8
All good now guys, copious penetrating oil, and a hefty dink, and got a spanner onto the key and moved it.
It was the transfer case hi/lo selector shaft as suspected and it was seized up solid (all the way forward in lo).
Now soaking over night and will reassemble tomorrow with a wee bit of lithium grease to keep it sweet.
Going to do transfer case oil change while I am in the area. It looks to me like there is some moisture in the linkage housing so will get a good bit of EP90 in the housing too before assembling.
Thanks for the tips!
It was the transfer case hi/lo selector shaft as suspected and it was seized up solid (all the way forward in lo).
Now soaking over night and will reassemble tomorrow with a wee bit of lithium grease to keep it sweet.
Going to do transfer case oil change while I am in the area. It looks to me like there is some moisture in the linkage housing so will get a good bit of EP90 in the housing too before assembling.
Thanks for the tips!
