locking wheel nuts
- Thread starter TRKnapp
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If they're the original ones you can buy a new key, they're lettered.
or - You can buy a generic removal tool, not too expensive.
or - most tyre fitters carry a set of removal tools
or - you can just smash a slightly smaller socket on
or - you could weld a nut on them and get them off with a socket
or - You can buy a generic removal tool, not too expensive.
or - most tyre fitters carry a set of removal tools
or - you can just smash a slightly smaller socket on
or - you could weld a nut on them and get them off with a socket
Cheers for that, will have a look for a new key then.
- Posts
- 83,230
- Location
- Embasinga stocæ
Agreed, everything on mine is Tq'd to the correct value, 35 years as an aircraft engineer has got that ingrained!but still torqued:rolly:
FlyingPete
Well-Known Member
- Posts
- 1,294
- Location
- Coventry
I'd see if you can get a nut splitter tool to work (providing you're willing to sacrifice the nut)
- Posts
- 83,230
- Location
- Embasinga stocæ
how are yu going to get that in there?
That's a good idea will have a look, yeh don't care about the nut it's useless with a dud key!
Might not work but I'll have a look on the off chance!
FlyingPete
Well-Known Member
- Posts
- 1,294
- Location
- Coventry
It wouldn't work with alloys, but on the steel wheels fitted atm there might be the room.
Righty tighty, lefty loosy - looking at the picture and the way the pins have bent it looks like you were tightening them rather than loosening, or is it an optical illusion?
does look like they've bent the wrong way, I was swapping wheels over to change a puncture so could have bent when tightening after to be honest.
Similar threads
Freelander 1
Locking Wheel nut key
