locking nuts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sparkey0151

New Member
Posts
4
just got l/r disco no wheel brace but can get a 27mm no prob but any ideas about getting locking nut of the spare wheel?
regards john
 
- If it's the one piece type just hammer an old socket onto it and off it comes.
- If it's the two piece with an outer spinning section beat it with a chisel until the outer piece either jams or shears off, then go with the socket.
- If you want to be creative then weld a nut onto it and then go with the socket
- Buy a set of locking wheel nut removers from ebay
- If it's a Land Rover locking nut it will have a letter on it, buy the appropriately lettered key off ebay.

Nope, sorry mate, no ideas.
 
Back
Top