Light Guard Template

Hi All,

Just wondering if anyone has the rear light guard drilling template and would be willing to e mail me a copy?

Many thanks

AJO

For every RR ever made?

P38 please!!!

Its late!!

I'm gonna use 3m sticky foam to save drilling the bodywork, don't want holes if I decide to take them off

Chrisfrain2007 said:

I'm gonna use 3m sticky foam to save drilling the bodywork, don't want holes if I decide to take them off

Click to expand...

I was thinking of doing this, let me know how you get on and if they fall off!

Mine were stuck on with sticky foam from new (I have the original sales invoice) by the Land Rover dealer.

Fifteen years later, when I first got the car, I took them off and can confirm that they were definitely not going to fall off - a couple of the light guards had been damaged, but this had done nothing to make the brackets any less securely attached to the bodywork.

If the foam's decent quality, I doubt very much you'll have any problems...

Much safer to use the sticky foam. Over the years a few manufacturers have produced light guards so it's difficult to be certain that a template that you might get will be precisely what you need.

I don't want to risk one falling off...then its a whole new set. I don't trust sticky tape.. I have a rivnut tool and new cage bolts so want to do it properly!

Thanks anyway!

AJO said:

I don't want to risk one falling off...then its a whole new set. I don't trust sticky tape.. I have a rivnut tool and new cage bolts so want to do it properly!

Thanks anyway!

Click to expand...

manufacturers use sticky foam to stick badges on all the time, and is what landrover used to stick there light guards on. ant u just offer up the brackets and mark some holes?

just a thought, your rears cant really fall off as the brackets are held on by the tailgate straps

Send me your email address and I will pdf one for you, this is my email

[email protected]

Thanks Len,

Just done it... I used the holes as templates and it was fine. I borrowed a rivnit tool and put them back ok.

Thanks

Ant

len you should edit your post and delete your email or the spambots will get you. its better to send personal details to another member via a PM.