Landshandy
Active Member
- Posts
- 653
Anyone know about light connectors? I bought some fog lights for my new bull bar and I need to change the connectors on the vehicle to fit into these (see below). Does anyone know what type these fit into?
Disco 2 Light connector
- Thread starter Landshandy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
No Idea...LOL. I assume a std type connector, maybe somewhere like maplins of hafrauds would be a good place to start. If you cannot find them you can always chop it off and fit a complete male female waterproof connector of some sort.
How high are you fitting them, I always thought fog lights should be fitted low down on the car.
Cheers
How high are you fitting them, I always thought fog lights should be fitted low down on the car.
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Landshandy
Active Member
- Posts
- 653
They sit at the same height the original ones did so no change really.
brian47
Well-Known Member
- Posts
- 8,867
@Landshandy
Don't forget a liberal application of silicone grease and a covering of self amalgamating tape to keep the water out.
Don't forget a liberal application of silicone grease and a covering of self amalgamating tape to keep the water out.
sierrafery
Well-Known Member
- Posts
- 17,108
- Location
- Arad/Romania
send PM to @PaulMc or contact him there http://stores.ebay.co.uk/Land-Rover-Connectors.... he is the bee's knees in this area
