LCM
- Thread starter Awale23
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
Push the two tabs in and pull sideways on the opposite side
- Posts
- 5,714
- Location
- North Manchester
That looks like it's been replaced before
Was so tight. All sorted and the new one works
My thoughts exactly. Just fitted another
- Posts
- 5,714
- Location
- North Manchester
If you bought a used one watch the mileage as the LCM stores a backup and rumour has it the cluster will pick the highest.
Really? Oh no
- Posts
- 5,714
- Location
- North Manchester
I believe it also puts a tamper dot next to the mileage. Can't remember what mine showed when I did it.
You mean like this lol? The dot next to the circled miles?
Attachments
- Posts
- 5,714
- Location
- North Manchester
Possibly
That was already there as it could’ve been from the replacement LCM before. We’ll see what happens.
- Posts
- 5,714
- Location
- North Manchester
Quick google says yes
AllanWorms
Well-Known Member
- Posts
- 269
- Location
- Whangarei, NZ
In E39 BMWs, the tamper light shows up if the VIN in the LCM doesn't match the cluster.
The Milage updates in the whole car, to whichever one is highest, every 100kms... but in the system, that could be in 1 km, or in 99 kms...
I don't know about the Landy stuff, but I used "BMW Scanner 1.4" to update the VIN and got the LCM to use the correct milge BEFORE it updates the rest of the car.
The Milage updates in the whole car, to whichever one is highest, every 100kms... but in the system, that could be in 1 km, or in 99 kms...
I don't know about the Landy stuff, but I used "BMW Scanner 1.4" to update the VIN and got the LCM to use the correct milge BEFORE it updates the rest of the car.
- Posts
- 5,714
- Location
- North Manchester
Yes you can but when I did mine the LR software wasn't listed in the BMW scanner so I took a punt on the closest.
