gozitan
New Member
- Posts
- 7
- Location
- Gozo, Malta
ive read plenty of threads but there doesnt seem to be an agreement. does making the exhaust out of larger bore pipe increase or decrease power, or make no difference on a turbo diesel engine?
larger exhaust bore or not??
- Thread starter gozitan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
disco2shaun
New Member
- Posts
- 1,137
- Location
- In the coldest caravan in Doncaster!
dont think it makes much difference to power. if you remove cat and middle box you will gain a few bhp. ive replaced mine with de-cat pipe and middle box replacement pipe. goes like **** stink and sounds b.e.a.utifull
From TD5Alive webpage:
Why dont we make 'Big Bore' systems? A 3 inch bore system would not be appropriate for modern land rover diesels, since the turbo outlets are only 2 1/4 inches in diameter. Age old (Proven) tuning theory states that the optimal turbo down pipe should be 10% larger in diameter than the turbo outlet casting. This is precisely why land rover chose 2 1/2", as it's a perfect match to the turbo. Using 2 1/2" pipe maintains a rapid flow of exhaust gasses to get them out quickly! Using 3" pipe would reduce the velocity of exhaust gasses, their fore retaining excess heat at the turbo, and exhaust manifold. Another factor is the reduction of back pressure you'd get from a 3" exhaust, as the wide open space of the exhaust takes more gas to fill it, and hence push out the tailpipe. The result could potentially cause turbo over speed, which can seriously decrease the life span of your turbo!
Why dont we make 'Big Bore' systems? A 3 inch bore system would not be appropriate for modern land rover diesels, since the turbo outlets are only 2 1/4 inches in diameter. Age old (Proven) tuning theory states that the optimal turbo down pipe should be 10% larger in diameter than the turbo outlet casting. This is precisely why land rover chose 2 1/2", as it's a perfect match to the turbo. Using 2 1/2" pipe maintains a rapid flow of exhaust gasses to get them out quickly! Using 3" pipe would reduce the velocity of exhaust gasses, their fore retaining excess heat at the turbo, and exhaust manifold. Another factor is the reduction of back pressure you'd get from a 3" exhaust, as the wide open space of the exhaust takes more gas to fill it, and hence push out the tailpipe. The result could potentially cause turbo over speed, which can seriously decrease the life span of your turbo!
gozitan
New Member
- Posts
- 7
- Location
- Gozo, Malta
now thats the explanation i was looking for! 
thanks mturri. it makes a lot of sense.. so best thing to do is to remove the cat and leave the same bore.. finally decided what to do with the exhaust
thanks mturri. it makes a lot of sense.. so best thing to do is to remove the cat and leave the same bore.. finally decided what to do with the exhaust 
