damsmithy
Active Member
- Posts
- 246
- Location
- high wycombe , buckinghamshire
some bits for sale clearing the yard
2 rangie classic panhard rods
2 semi complete RRC axels ( no calipers)
series 3 front panel could do with some repairs
series swb i for williams cab
got a 1:4 transfer case off a lt77 would need rebuild due to a collapsed bearing spare or repairs
disco R380 gear box (no tranny) with 110k on it in gwo
200tdi into series steve parker exhaust conversion pipe
RRC 3 spoke alloys paint is a bit flaky has tyres which are useless would need to be replaced set of 4
a pair of standard series diffs in gwo
message me for prices , would consider any SENSIBLE p/x on RRC parts can deliver for a cost located in high wycombe buckinghamshire many thanks !
also got a anti roll bar kit for an rrc , would imagine it would fit disco , would probably need new ball links
rover montego seats
sealed beam orignal lucas head lights to fit series ?
series 3 hard top (sides and roof) good condition however sadly someone got a bit messy when drilling the holes for the rear door hinge nato green
series 3 steering wheel
very tatty rear door for either a series / defender would fill the hole but thats about all its good for
19j turbo and manifolds ( intake aswell) gwo
19j injectors + lines gwo
19j injector pump gwo
2.5 n/a air filter housing
willing to do deals ! (SENSIBLE ONES )
2 rangie classic panhard rods
2 semi complete RRC axels ( no calipers)
series 3 front panel could do with some repairs
series swb i for williams cab
got a 1:4 transfer case off a lt77 would need rebuild due to a collapsed bearing spare or repairs
disco R380 gear box (no tranny) with 110k on it in gwo
200tdi into series steve parker exhaust conversion pipe
RRC 3 spoke alloys paint is a bit flaky has tyres which are useless would need to be replaced set of 4
a pair of standard series diffs in gwo
message me for prices , would consider any SENSIBLE p/x on RRC parts can deliver for a cost located in high wycombe buckinghamshire many thanks !
also got a anti roll bar kit for an rrc , would imagine it would fit disco , would probably need new ball links
rover montego seats
sealed beam orignal lucas head lights to fit series ?
series 3 hard top (sides and roof) good condition however sadly someone got a bit messy when drilling the holes for the rear door hinge nato green
series 3 steering wheel
very tatty rear door for either a series / defender would fill the hole but thats about all its good for
19j turbo and manifolds ( intake aswell) gwo
19j injectors + lines gwo
19j injector pump gwo
2.5 n/a air filter housing
willing to do deals ! (SENSIBLE ONES )
Last edited:
