Keep getting bonnet open lunging up on dash when it is securely closed. I have changed the alarm switch inside the bonnet just in front of the drivers side dash and still no change. Checked the offside bonnet latch no sensor or wiring there. Now I'm stumped , any help gratefully accepted. Tia Paul
L322 v8 3.6td
- Thread starter Paul vice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
As far as I am aware they only have that 1 switch.
If its new and adjusted correctly (not sure if there is any adjustment on them) then the next place would be the wiring. Its only a simple switch to earth.
Could you just unplug it and bridge or not, cant remember which way it works, check the switch with a meter to find out if you need to bridge the connector when bonnet closed. If you still get the warnings then the wiring needs checking.
Thats where I would start anyway
If you dont have a Digital Multimeter now would be a good time to buy 1.
J
If its new and adjusted correctly (not sure if there is any adjustment on them) then the next place would be the wiring. Its only a simple switch to earth.
Could you just unplug it and bridge or not, cant remember which way it works, check the switch with a meter to find out if you need to bridge the connector when bonnet closed. If you still get the warnings then the wiring needs checking.
Thats where I would start anyway
If you dont have a Digital Multimeter now would be a good time to buy 1
.J
