L322 l322 td6 diagnostics

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bigt0

Member
Posts
15
hi
i have a i322 td6 i connected a diagnostic computer to my td6 it will let me in to all system
but will not let me in to engine management system. can any body help with this.
cheers bigto
 
Have put a snap on diagnostic
Computer on it this morning
It has come up with fault code
P1613 stability controller.
Has anyone had this problem
What do I do to fix this fault
Cheers bigto
 
Isnt that in the center console behind the gear lever where every body spills drink on to ? @holidaychicken might know.
That’s the transfer box control and mine was full of coffee.
Loads of similar error codes for TD4 / TD6 and X5 on google looking at injectors , EGR etc. I would try and get it on live data like faultmate that will give you individual cylinder values.
 
That’s the transfer box control and mine was full of coffee.
Loads of similar error codes for TD4 / TD6 and X5 on google looking at injectors , EGR etc. I would try and get it on live data like faultmate that will give you individual cylinder values.
How messy are you? I've never once spilled anything over there.

Where coffee goes ;)
a-woman-with-bad-breath.jpg
 
I wasn't the one that spilled it, i just found an awful sticky mess when I removed the panel to see why the transfer box switch wasn't working. When i cleaned it up it started working again.
I think i would be scared to put anything other than coffee in there ! :oops:
 
I wasn't the one that spilled it, i just found an awful sticky mess when I removed the panel to see why the transfer box switch wasn't working. When i cleaned it up it started working again.
I think i would be scared to put anything other than coffee in there ! :oops:
I think she's ready to bite.
You sure it was coffee?
 
Back
Top