L322 side lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

delisle

New Member
Posts
121
Location
Wirral
Guy
Just replaced my old tired sidelight builds with some nice White LED bulbs. Looks good but now have check front light error on display! Lights working fine but have warning. Am I ok to use the car with this warning or will it through up another fault or just ignore?
Cheers
Rob
 
Because filament bulbs draw more current, the cars diagnostics get confused when the LED lights are fitted. They draw much less current, and have a different resistance. I thinbk it can be cured by wiring a resistor in, in parallel, or somethin....
 
Ok looked and found some with resistors built in so might get them. Am I causing more problems not changing them back or could i drive forever with the lamp warning up an have no problems from that?
 
Mick
I got in mine thismorning and had no faults with bulbs. Weird. But if you search eBay for 501 LED bulbs canbus you will find a load. Canbus is the system that will ping up a bulb fault.
Rob
 
You must log in or register to reply here.

Similar threads

B
L322 Reservoir Valve.
Replies
12
Views
995
Mark Piercy
Mark Piercy
J
Brake lights
Replies
4
Views
557
300bhp/ton
300bhp/ton
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
728
oldradiotech
O
R
TüV problem in Germany
Replies
0
Views
309
roythebus
R
C
Warning Light for WIPAC indicator module not lighting up.
Replies
1
Views
467
miktdish
miktdish
Back
Top