l322 gas system help

Just fitted a new engine in my Range Rover l322 2003 4.4 (bmw) all runs mint however the engine I have put in has a different gas system to my old one the old one was a zenit and the new one is an omvl dream xxi have a few wires that I am not sure where they go to does anyone run one of these systems that could possibly help also the gas pipe that runs from my tank to the gas system is 6mm and the one that previously ran to the system that is on the new engine was 8mm would this make a difference or not

I may have the wiring diagram somewhere......but I am out and about at the moment, wont be back til later this afternoon....I'll take a look then.

Saint.V8 said:

I may have the wiring diagram somewhere......but I am out and about at the moment, wont be back til later this afternoon....I'll take a look then.

Click to expand...

Thank you

Marksy said:

Thank you

Click to expand...

Sorry for the slightly later reply......family got in the way!

I hope the attached helps.

Also, do you have the diagnostics lead nd software to be ableto recalibrate the system to the new install? The software can be obtained via free download from www.lpgshop.co.uk (no affiliation) nd you can also get the diagnostic lead from there too.

Remeber for it to be certified for your insurance, it will need to be installed as per CoP 11 for Autogas installations in vehicles (I have a copy but it is at work and I am working on site for the next 3 months - but if you get stuck I may be bale to pop in on the way home one evening and scan it in) and will need to be checked by an authorised installer in order to get the LPG cert that some insurance companies will require.