L322 ABS Relay help

Philip1972 · Feb 5, 2019

Hi,

I have a code on the car that says "0x000E-ABS valve relay".

I have searched on line and can buy a relay that matches that description, but cannot find where on earth that relay is in the car?

I have googled (it just shows me where the air suspension relay is?) and I have looked on all the forums for relay fuse maps, but none of them tell me.

Does anyone know?

Thanks

Phil

Philip1972 · Feb 5, 2019

By the way, no ABS light is on the dash.

Saint.V8 · Feb 5, 2019

What diagnostics are you using?

Philip1972 · Feb 5, 2019

Its just an LR2 I carsoft, so nothing fancy!

Philip1972 · Feb 6, 2019

Anyone?

gold rover · Feb 6, 2019

Someone with knowledge will be along soon. @Saint.V8 juggles work , wife, young kids and his own vehicles, with answers on here. Others have similar real life juggles. You only posted 24hrs ago so just relax, until Ant or someone passes by again. It won't be long

Mark Piercy · Feb 6, 2019

Is it a constant warning light on the dash or just in the ECU memory?

Philip1972 · Feb 6, 2019

Hi, Nothing on the dash, just in the ECU. Have cleared but it comes back.

Mark Piercy · Feb 7, 2019

@Saint.V8 did a repair on his '322 with the abs system.
https://www.landyzone.co.uk/land-ro...response-to-tech-bulletin-lm206-001v2.223588/
It may not be your exact problem, but may give some pointers.

Saint.V8 · Feb 7, 2019

There are no relays in the ABS system, except those located inside the ABS ECU/Module itself.....as far as I know.

Looking at the wiring diagram confirms this - there is a relay in the diagram, but it is part of the Engine ECU system and not the ABS system.

The ABS system the L322 uses is taken from the E39, E53 and E38 bimmers, and depending on which application it is being used in - some features are turned off or on as required during the coding process....it could be either a replacement ECU from another vehicle and not coded correctly and as such it is reporting the absence of something the L322 doesn't have, or there is indeed an internal fault to the module....

Does the ABS system actually work? Find a loose bit of gravel, make sure no one is around, acelerate and then jump on the brakes....if you get the typical ABS judder then I would say it is working OK, if it locks up, the ABS system needs further investigation.

L322 ABS Relay help

Philip1972

Member

Philip1972

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Philip1972

Member

Philip1972

Member

gold rover

Well-Known Member

Mark Piercy

Well fumbled member....

Philip1972

Member

Mark Piercy

Well fumbled member....

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Similar threads