l322 4.4 tdv8 not starting

Hi Guy's, my 4.4 TDV8 broke down on me a week ago, ive out just managed to get my SDD software working.

It turns over, but doesn't fire.

I've attached the SDD fault codes & would appreciate if you could have a look & tell me if I'm missing something.

Many thanks in advance

ASH

Attached

What year?

But of those codes I would say the engine oil ones would be the issue.
I will look up those codes in the morning for a 2011.

J

Sorry, its a 2011

This might be of interest.

Wazzajnr said:

This might be of interest.

fullfatrr.com - View topic - P040D-00 (2F) EGR temperature sensor replacement

www.fullfatrr.com

Click to expand...

Would that cause a no start scenario?

Im sure ive had this fault on for a while

kermit_rr said:

Would that cause a no start scenario?

Click to expand...

Don't know, I didn't read the linked thread but it's certainly one of the codes listed so figured it was relevant.

I wonder, is there any fuel in it?

Yes there is, it's showing half a tank & ive eliminated it by putting a bit more in

If the transfer pump doesn't work then fuel could be all in one side.
If it thinks it's run out, i think there's a minimum you need to put in before it will allow a start. Not sure what that is, depends how much you put in and which side the pickup/level sender is.
Others will know more than me

Found these.
But still havent found anything to say they would give a no start situation.

Have you tried to clear the faults, then see what comes back?

J

Yes Mate, I cleared the faults, re read them & this is what ive put o here

Does SDD do live data?
Might be worth checking different stuff during cranking.

J

marjon said:

Does SDD do live data?
Might be worth checking different stuff during cranking.

J

Click to expand...

It does. Not seen fuel related values, though not looked, yet