Bife
Active Member
- Posts
- 182
- Location
- Lisbon Portugal
Hello,
Last year I had a problem of loosing water, that I thought I had cured by changing the corroded engine block core plugs.
Well, now our 1999 freelander 2.0l L Series has started to loose water again.
It was a slight loss with no overheating, until I tried to fill up the expansion tank today and the water level kept dropping, and then I noticed water on the garage floor.
I got a light and took a look and water is coming from behind the timing belt plastic cover at the height of the head gasket and flowing back along the top of the block to then fall down the back of the block. At the front side of the timing belt cover I can see no water, so it really does appear to be coming from behind this cover.
There really is a quite a strong little stream of water even without the engine running, so I don't think it is a head gasket.
My retired mechanic dad said it could be a core plug in the end of the head.
Anybody know if there is one there / heard of this problem before / have any other suggestions?
Thanks
Bife
Last year I had a problem of loosing water, that I thought I had cured by changing the corroded engine block core plugs.
Well, now our 1999 freelander 2.0l L Series has started to loose water again.
It was a slight loss with no overheating, until I tried to fill up the expansion tank today and the water level kept dropping, and then I noticed water on the garage floor.
I got a light and took a look and water is coming from behind the timing belt plastic cover at the height of the head gasket and flowing back along the top of the block to then fall down the back of the block. At the front side of the timing belt cover I can see no water, so it really does appear to be coming from behind this cover.
There really is a quite a strong little stream of water even without the engine running, so I don't think it is a head gasket.
My retired mechanic dad said it could be a core plug in the end of the head.
Anybody know if there is one there / heard of this problem before / have any other suggestions?
Thanks
Bife