Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
bastard
King Cab Conversion Advice ??
- Thread starter NRS91
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NRS91
Active Member
- Posts
- 189
- Location
- Macclesfield, UK
Right im back...
no king cabbed cummins 90 tonka truck yet...
but i have bought the worlds most pikey bodged ex-mod 110... slowly putting it into a respectable condition on the cheap...
so far ive removed the bodged 3" lift blocks and fitted bushes to the front axle... much better... also got it on 900x16s
next task is to de-pikey the cab then ill crack on fitting rear steer for a uni project...
anyway question is... any tips for neat bulkhead removal?
heres some pikey pics....
no king cabbed cummins 90 tonka truck yet...
but i have bought the worlds most pikey bodged ex-mod 110... slowly putting it into a respectable condition on the cheap...
so far ive removed the bodged 3" lift blocks and fitted bushes to the front axle... much better... also got it on 900x16s
next task is to de-pikey the cab then ill crack on fitting rear steer for a uni project...
anyway question is... any tips for neat bulkhead removal?
heres some pikey pics....
Attachments
-
10959442_10155219378895385_5523709633776225836_n.jpg -
10993483_10155219378905385_3479964632723409565_n.jpg -
10988300_10155219387600385_3409863081623410537_n.jpg -
10990012_10155238622815385_1523831070945445833_n.jpg -
1017417_10155256989150385_4106088848180441727_n.jpg -
10370796_10155260912725385_2271721210252563648_n.jpg
Similar threads
