KFC-1051s speakers
- Thread starter wornelly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,497
They are not round then, u don't say where you wish to fit them. The depth is quite deep so you will need at least 70-75mm so that will need a bit of panel work if you are fitting them to the doors, better to get spacer rings may be.
Hi, thanks for your reply, didnt think to say they were round ones, I want them to fit where the original speakers are, both front and rear, I have included a link showing the actual dimensions, http://images.kenwood.eu/files/image/726/8/original/illus-KFC-1051S.jpg
Many thanks, :doh:
Many thanks, :doh:
discool
Well-Known Member
- Posts
- 13,497
41.9mm depth then I looked into it last year and IIRC you have 45mm to play with. but make sure take the speaker from the door and have a look you will see that half of the metal door panel covers the botton of the hole.
These KFC's were top of my list they have a good spec. Don't go to Halfords you can get them off the web and save £10-15.
Still haven't change my speakers still thinking about it only got as far as a sub in a box in the boot.
These KFC's were top of my list they have a good spec. Don't go to Halfords you can get them off the web and save £10-15.
Still haven't change my speakers still thinking about it only got as far as a sub in a box in the boot.
Last edited:
