Just Wondering...

pos · Sep 21, 2008

Hello,

You know how people are prepared to pay a lot of money for a down pipe when retro-fitting a 200tdi disco engine into a deepender, what would be wrong with grinding the original down pipe down leaving a short piece (like a stub) and then simply using some of that flexible metal chimney / flue tubing to mate it to the through pipe? Would it work without causing any problems?

Cheers
-Pos

porthos0 · Sep 21, 2008

Just Make You Own, Thats What We've Done And Got A Perfect Replica Of A Steve Parker Down Pipe That Cos £0 Instead Of £124

choppa · Sep 21, 2008

that would probbly work pos , but you'v got very little room to do anything ,they maybe expensive but i did'nt find a better solution to the problem , and i'v seen loads of attempts at fabricating summat to fit ...

steve parker down pipe ...

pos · Sep 21, 2008

I'm not going ahead just yet, but thats the only thing I was worried about, other than that it'd be fairly simple really and I'd favor the flexi pipe!

choppa · Sep 21, 2008

pos said:
I'm not going ahead just yet, but thats the only thing I was worried about, other than that it'd be fairly simple really and I'd favor the flexi pipe!

you aint got alot of room tho pos , remember it drops virtical from the turbo and then go'es around the starter .. and you still have to move the clutch hose .... i just found it simpler to get the down pipe as i only live about ten miles from parkers gaff ...

i'd be interested to see what you come up with tho...

pos · Sep 21, 2008

Alright, if, and only if I go ahead, I'll put piccies up! Insurance will go up by 40% though!

choppa · Sep 21, 2008

pos said:
Alright, if, and only if I go ahead, I'll put piccies up! Insurance will go up by 40% though!

40% .. fookin ell thats just mean ....did'nt make much difference with my insurance , i went with flux , the only thing was i had to have an engineers report done to make sure they were happy with it ... and ohhhh the paperwork was horrendous .....

pos · Sep 21, 2008

yeah they wanted a garage to write a letter saying they had done it!!! Suppose they'd do that for me!

iannotts · Sep 21, 2008

i didnt pay £124 for mine got it of ebay for £80ish linky to follow

disco - 90/110 downpipe

porthos0 · Sep 21, 2008

Christ..You Insurance Companys Want You To Do That....Mine Dont Care About It, Insurance Stays The Same And They Dont Want Proof Of How Or Who Did It,

choppa · Sep 21, 2008

porthos0 said:
Christ..You Insurance Companys Want You To Do That....Mine Dont Care About It, Insurance Stays The Same And They Dont Want Proof Of How Or Who Did It,

mine was'nt just an engine change tho .. it was full up rebuild inc chassis , and they just wanted the m.o.t bloke to be completely happy with it .. lot of paperwork tho ..

boydy1989 · Sep 21, 2008

A 300 goes right in... Using the disco downpipe, cut and shortened to make it work

boydy1989 · Sep 21, 2008

Oh yeah. Is this any help?
FLEXI FLEXIBLE EXHAUST JOINT BACK BOX SILENCER MANIFOLD on eBay, also, Campervan Motorhome Parts, Campers, Caravans Motorhomes, Cars, Parts Vehicles (end time 24-Aug-08 20:41:52 BST)

Just Wondering...

pos

Well-Known Member

porthos0

New Member

choppa

Well-Known Member

pos

Well-Known Member

choppa

Well-Known Member

pos

Well-Known Member

choppa

Well-Known Member

pos

Well-Known Member

iannotts

New Member

porthos0

New Member

choppa

Well-Known Member

boydy1989

Well-Known Member

boydy1989

Well-Known Member

Similar threads