Hi all, i'm after some advice on how to deal with an issue with my autobox.
While greenlaning this weekend, i selected reverse, got a small slight clunk, and the engine would rev as if it were in neutral. No reverse drive at all. I had F4 on the dash display for a second but it cleared and never came back. It drive fine forward, properly selects and displays all gears, including reverse, but when selecting reverse, despite feeling the box engage and do something, no reverse drive.
I have not touched the autobox recently, so dont think it can be the reverse bolt that occasinally gets taken out by mistake.
What would be the best way to check whats up, low on cash atm so appreciate any ideas or tips.
I'm thinking:
Check barrel connectors (maybe disconnect battery for a while)
Then solenoids? Not sure how to but willing to try.
Check reverse bolt
Give up and take to service.
Thanks.
While greenlaning this weekend, i selected reverse, got a small slight clunk, and the engine would rev as if it were in neutral. No reverse drive at all. I had F4 on the dash display for a second but it cleared and never came back. It drive fine forward, properly selects and displays all gears, including reverse, but when selecting reverse, despite feeling the box engage and do something, no reverse drive.
I have not touched the autobox recently, so dont think it can be the reverse bolt that occasinally gets taken out by mistake.
What would be the best way to check whats up, low on cash atm so appreciate any ideas or tips.
I'm thinking:
Check barrel connectors (maybe disconnect battery for a while)
Then solenoids? Not sure how to but willing to try.
Check reverse bolt
Give up and take to service.
Thanks.