Zonda_
New Member
- Posts
- 113
- Location
- Saltburn by Sea
Or should I just weight it in with the rest of the 110 when it's been robbed of bits?
Is a 2 1/4 Diesel engine worth anything?
- Thread starter Zonda_
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
2 1/4 in a defender?????
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
real early, I heard of 2 1/2's in series motors
Zonda_
New Member
- Posts
- 113
- Location
- Saltburn by Sea
Well I'm only going on what it says on the log book, the truck is a 1984 110. The logbook says 2286cc which I assumed was a 2 1/4?
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Early 110's I believe A reg on wards til C reg had 2.25's then the 2.5 were introduced Not 100% sure about the A reg I think there were a only a few. Jai
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
I used to have an A Reg 90 - that had a 2.5 Normally Asthmatic in it.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
arrrr its a 1984, the change over year so it possably could be right
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Was it under the sofa??
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
naaaaa behind the curtains
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
but this ones petrol thought question is about diesel
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
but but but... I just trying too say 2.25's were around in '84
back to google then
back to google then
