Freelander 1 IRD Speed sensor question

Hi All,

Can anyone with a canbus dash (post 2003 ish I guess?) do a visual check for me.

I've just realised that my IRD has a speed sensor bolted into it - and my car has a canbus dash so no cables run to the sensor.

Either
a) the 2003 onwards models fitted with speed sensors even though they didn't use them
b) I've had a rebuilt IRD that wasn't in the history when I bought it

Can someone check their 2003 onwards vehicle to see if there's a speed sensor sticking out the top of it?

Ta!

Would have thought the only IRD fitted with a speed sensor would be from a pre 2001 non ABS car, don't have access to my Rave discs to confirm though.

Recently Grumpy Gel enquired about a box-like device bolted to the back of an IRD on a 1.8 FL1. It turned out to be a Vibration damper. Could this be what you're asking about?
see:https://www.landyzone.co.uk/land-rover/whats-this-bolted-to-the-ird.289433/#post-3575723

Could this be the 2nd thing we've found bolted to IRDs after all this time!

We need a pic. If's not just the breather pipe's come off and what remains looks like a sensor?

I'm pretty sure the ABS sensors are only used by the ABS/TC/HDC puter. The speedo is taken from the gearbox.

No speed sensor on the IRD. Early non ABS vehicle's used a pickup in the gearbox for the speedo. ABS models use either one rear ABS sensor (pre 2001) or an average of all four for later (post 2001)

Can we have a pic of the OP's ird?

Hmm... hm.

Maybe It's a blank or something, I'll snap a picture at lunch time when I've dealt with the t**t that just deleted my drivers wing mirror.
People keep jumping out round parked cars when there's no space here, they appear to have learned a lesson though because their A pillar was trashed.