SnapBrokeIt
New Member
- Posts
- 23
Hi, first post but been using the forum for ages....
Background:-Hole in underside of IRD; hence will no-longer work as designed ie: drive! (long story! my garage fecked up!)
Model:-Freelander1 TD4 2001 model
Help:-Can I just remove the IRD entirely?
Reason:-Unsure that just the blanking plate method will suffice due to the hole on the underside of the IRD (appox 1x2 inches) I suspect without further inspection that the the gear inside are buggered*
Any help on this will be massively appreciated, I really don't want to replace the IRD unit due to expense and that there isn't much life left in the car, but for a few more years in 2wd will give me a few more years of happy motoring! (hopefully)
Cheers JB
Background:-Hole in underside of IRD; hence will no-longer work as designed ie: drive! (long story! my garage fecked up!)
Model:-Freelander1 TD4 2001 model
Help:-Can I just remove the IRD entirely?
Reason:-Unsure that just the blanking plate method will suffice due to the hole on the underside of the IRD (appox 1x2 inches) I suspect without further inspection that the the gear inside are buggered*
Any help on this will be massively appreciated, I really don't want to replace the IRD unit due to expense and that there isn't much life left in the car, but for a few more years in 2wd will give me a few more years of happy motoring! (hopefully)
Cheers JB