Interior pillars P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Noahsark123

Member
Posts
22
Location
Calne wilts
Hi landys
Applogies for the long delay although work and brining Victoria up to scratch has taken up time!.
As we are all lockdown I hope my weekend work helps!
I managed to secure two front B pillars in good order and replaced quite easy! Nothing broke!
However getting rear pillars not possible... so today! I removed seat belt housing! Small flat screw driver inserted into tound bolt hold the side shift to remove.
Undo bolt remembering to catch once loose! Pull belt free.
Then run flat plastic object inside seal to expose cover then pop gently!
Be careful not to bend panel out but pull straight to avoid small studs breaking,
EASY.
Once out ! Lie panel on flat surface and use SMALL scraper to gently remove fuzzy crap and excess glue!
Then put into a pail or mop bucket with WARM soapy water then leave for 20 mins! Rub gently in bucket with soft cloth! You will feel glue separate!
Then dry off! And replace! Doddle!
Saved me £60!
I have video which i can send if you get in touch!
 
Victoria now ending her makeover stage! Just the clacking and slight overheating! After I changed all! Coolant pipes and thermostat. Paint job done , at least she looks pretty although temperamental!
 

Attachments

  • 190AC2AE-ADA0-41A5-A702-D2C6874A3AEE.jpeg
    190AC2AE-ADA0-41A5-A702-D2C6874A3AEE.jpeg
    621.4 KB · Views: 64
Back
Top