Mikyes300tdi
New Member
- Posts
- 44
hi I'm looking at getting 5 special tracks fitted Wot's the biggest can go with out lifting it and wot size can I go with 2" lift kit on cheers mike
Insa turbo special tracks and lift kit
- Thread starter Mikyes300tdi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
op2:Vincemcdonald
Active Member
- Posts
- 488
- Location
- Southampton
I have SAG all grips 7.50x16 with a 2 inch lift and no issues except the standard rear shocks topping out with a bang sometimes. What size tyres are you fitting?
Mikyes300tdi
New Member
- Posts
- 44
I want get biggest ones I can with out cutting arches think 275-85-16 not sure if much room I'm lifting it 2inch aswell just don't want to order wrong size online what's them sag all grip like cheers mate
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
Me personally i would go 265 75 16 or 255 on modular with 32 mm offset. 2 inch lift and itl miss.
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
I had 235/85/16 Insa Special Tracks on my last Disco.
That had a 2" lift and it still needed the rear arches camel cutting.
That had a 2" lift and it still needed the rear arches camel cutting.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
Camel cut need doin with them being so aggresive but the flexi arches can help coz you can cut alot away
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
Is that anything to do with Camel Toe?
Mikyes300tdi
New Member
- Posts
- 44
265-75-16 prob will go for with terrifirma 2"lift kit I think I'm thinking if to cut arces or not and fit flexi arches
Mikyes300tdi
New Member
- Posts
- 44
I went with 235s just fitted a winch bumper & just got a snorkel to go on not the best condition needs bit of repair to it sealant and a hole patching up got with some spares of a lad breaking disco
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
Remember more weight = less lift. Winches, boot full of jacks, ropes and pulling gear and other bits can sag you down a bit. So test it fully loaded before a cut!
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Mikyes300tdi
New Member
- Posts
- 44
Cheers for will try that 1st and medium or heavy duty lift best
