Insa Turbo Dakars.

Andy Land · Jul 28, 2011

Bromsgrove Defender said:
I'll have a listen

As for the EP90, a bit more probably wont hurt, am already in the dog house for having a leak

Me too but you stop one and another one appears ... got one from the rear diff now too but I think that's been caused by a blocked wading breather so got a new pinion seal for it .... endless lists eh?

Bromsgrove Defender · Jul 28, 2011

Andy Land said:
Me too but you stop one and another one appears ... got one from the rear diff now too but I think that's been caused by a blocked wading breather so got a new pinion seal for it .... endless lists eh?

Keeps one amused though

Kernow oli · Aug 8, 2011

Hi I have 2 brand new Maxxis buckshot murders on 235 85 r16 to fit onto my 90, but need 2 more, they are quite alot to buy new, and have seen some new insa turbo dakars for £40 cheaper?? How do they compare as they look slightly different?? As long as they are the same size would it matter?? And which would you put on the front and which on the back if I did go for this set up?? Look forward to an answer?? Thanks
Oli

Andy Land · Aug 8, 2011

Kernow oli said:
Hi I have 2 brand new Maxxis buckshot murders on 235 85 r16 to fit onto my 90, but need 2 more, they are quite alot to buy new, and have seen some new insa turbo dakars for £40 cheaper?? How do they compare as they look slightly different?? As long as they are the same size would it matter?? And which would you put on the front and which on the back if I did go for this set up?? Look forward to an answer?? Thanks
Oli

Oli you need to start a new thread to ask this as nobody will see it here. I can't help as I'm not familiar with the Maxxis.

slomofo · Aug 8, 2011

FWIW I ran 265/75/16 Recip trial remould at 26front 30rear and got no uneven wear - now running same size Courser MT radial at 24 and 28 with same result (except quieter)

HTH

F

Andy Land · Aug 8, 2011

slomofo said:
FWIW I ran 265/75/16 Recip trial remould at 26front 30rear and got no uneven wear - now running same size Courser MT radial at 24 and 28 with same result (except quieter)

HTH

F

Fraser, where you been? Long time no speak ... are you running those pressures for the road? May lower mine a little as I'm running 30 on all four.
You going to Stoneleigh this weekend?

Station House · Aug 8, 2011

Only just seen this thread of yours Andy

Desperately want to say 'chalk test'

Leaving now - more wine to consume

slomofo · Aug 8, 2011

Andy Land said:
Fraser, where you been? Long time no speak ... are you running those pressures for the road? May lower mine a little as I'm running 30 on all four.
You going to Stoneleigh this weekend?

Hiya
I've been all over the shop!

Running those pressures for road without any drama's - low mileage though. They do go lower when mud plugging

I'm hoping to be there on Sunday - probably falling off the twist-off ramp if I get the chance!

Cheers

F

Andy Land · Aug 8, 2011

slomofo said:
Hiya
I've been all over the shop!

Running those pressures for road without any drama's - low mileage though. They do go lower when mud plugging

I'm hoping to be there on Sunday - probably falling off the twist-off ramp if I get the chance!

Cheers

F

Sounds good, I'm going on Saturday so won't have the pleasure of watching you fall off the ramp

Andy Land · Aug 8, 2011

Station House said:
Only just seen this thread of yours Andy

Desperately want to say 'chalk test'

Leaving now - more wine to consume

Hi there SH ... hope you're well.

Got the tracking done at the local Landy place and it was off the scale! It was obviously like that before I changed the track rod ends as I matched the threads with the new ones. Better now

Station House · Aug 9, 2011

Well worth having checked

I'm good - but sheared a swivel pin bolt off in the housing Saturday - managed to drill out, but now more bits on order!

Never straight forward is it

jamesmartin · Aug 9, 2011

was it bottom bolt as you dont ever need to remove bottom pin

Bromsgrove Defender · Aug 9, 2011

Andy Land said:
Got the tracking done at the local Landy place and it was off the scale! It was obviously like that before I changed the track rod ends as I matched the threads with the new ones. Better now

Nice one .....

Just the squeaks, clunks and leaks to sort now then

Andy Land · Aug 9, 2011

Bromsgrove Defender said:
Nice one .....

Just the squeaks, clunks and leaks to sort now then

No squeaks but plenty of leaks and clunks

You going to Stoneleigh BD? .... meet you for coffee if you are

Bromsgrove Defender · Aug 9, 2011

Andy Land said:
No squeaks but plenty of leaks and clunks

You going to Stoneleigh BD? .... meet you for coffee if you are

Wish I was mate

but I promised the Doris I'd take her to Shrewsbury Flower Show and it's on the same weekend

I think I'm going to Peterborough LRO though

bobbler · Aug 9, 2011

Bromsgrove Defender said:
I think I'm going to Peterborough LRO though

drop by the rock sliders stand if you do. will be there with a one or two beers

Bromsgrove Defender · Aug 9, 2011

bobbler said:
drop by the rock sliders stand if you do. will be there with a one or two beers

I'll be there

Andy Land · Aug 9, 2011

Bromsgrove Defender said:
Wish I was mate but I promised the Doris I'd take her to Shrewsbury Flower Show and it's on the same weekend

I think I'm going to Peterborough LRO though

Shrewsbury Flower Show? ... are you going to see the flowers or the Gaylanders in the car park?

Bromsgrove Defender · Aug 9, 2011

Andy Land said:
Shrewsbury Flower Show? ... are you going to see the flowers or the Gaylanders in the car park?

Both of course

Andy Land · Aug 9, 2011

Bromsgrove Defender said:
Both of course

You will of course see quite a few Gaylanders on the hard shoulder of the M54 en route too

Insa Turbo Dakars.

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads