Freelander 1 Inlet Manifold

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
There have been mods done to the inlet to delete the plastic part. @hd3 has a thread somewhere with pictures,

be here .. page 2
http://www.landyzone.co.uk/land-rover/intercooler-problem-mod.126484/page-2

BGH's missing pic from page 1 :
intakeModBGH_td4_01.jpg


in short .. the mod provides a quicker response from the engine
when the go-pedal is pressed .. particularly from low rpm ..
( and the 'effect' transposes up the rpm range ..
works well whether the engine is 'tuned-up' ( tuning box / remap ) or not
also .. only need to undo 1 bolt to remove it from the air-filter housing
and best to get rid of the egr valve as well .. install a 'delete' unit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Last edited:
Yes he does the super diesel at Honley, or he did last month when I was there, looked like a new owner though.
Yes they've built on everything, I grew up in Deepcar, I remember having a tour of the bypass when they were building it! I was at high school at the time, not that I'm old you understand;)
Mike
 
Will have to look into that mod hd3 and when money is better start saving. Skinny Mike, they dont care these days where they build, a few years ago i was offer a house to rent but refused it as its what we call methane city estate, methane meters in the house and garden and if there ever go off, the estate have to be evacuated. And I understand the age thing
 
Back
Top